6/10/2011
Version 6.03

EDIUS 6 Readme

This Readme contains important information that is not included in the User's Manual.
Also, this file might contain information that were recently changed or enhanced.
Please check this Readme before using.


What's inside this document

  1. License Agreement
  2. Revision dates
  3. Registered trademarks and trademarks

  1. License Agreement
    Please read the Software License Agreement before using this software. Do not use this software if you do not agree to the terms of this License Agreement.

  1. Revision dates
    The version number stated here is given to this package.
    A different version number may be given to separate applications or drivers.

Version 6.00 ( Release: 9/3/2010)

      • First release.

Version 6.01 ( Release: 10/8/2010)

        [Fixed issues]
      • Fixed issue of loading clip created with EDIUS.
      • Fixed issue of partial transfer.
      • Fixed issue of EDIUS not responding when opening chrominance setting dialog while playing clip to which multiple chrominances are applied.
      • Fixed issue of EDIUS being crashed when AAF output is performed in certain clips.
      • Fixed issue of VA track not working with V track when strip trim is performed.
      • Fixed issue of EDIUS being crashed when MPEG2 clip is partially transferred again while performing partial transfer.
      • Fixed issue of P2 clip not being transferred.
      • Fixed issue of EDIUS being crashed when using dissolve in progressive project.
      • Fixed issue of audio of clip not being played properly when the clip is shot with some cameras.
      • Fixed issue of exported P2 Clip not being played in Avid MediaComposer.

Version 6.02 ( Release: 1/14/2011)

        [New Features]
      • Added support for loading MXF file on SxS card which was recorded by SONY PMW-500.
      • Added support for playlist which was output to FTP/HDD(USB) using PLAY LIST EXPORT of AJ-HPM200.
      • Added support for timecode acquisition from Picture timing SEI.
      • Added support for H.264 hardware encoding utilizing Intel GPU.


      • [Fixed issues]
      • Fixed issue with FA round Gothic TV-b font being crashed in QuickTitler.
      • Fixed issue with end timecode of clip thumbnail on source browser displayed being off by one frame.
      • Fixed issue with transition between clips being cancelled when performing trim operation with Alt + N/M on timeline.
      • Fixed issue with being unable to play back specific MP4 file properly.
      • Fixed issue with distorted video when playing back movie in H.264 60p which was shot by Panasonic TM750.
      • Fixed issue with crash of EDIUS when specific operation is performed while editing shape with mask filter.
      • Fixes issue with being unablel to import specific effect preset file created with EDIUS Pro 5.
      • Fixed issue with crash of EDIUS by mouse wheel operations when playing back still image on player.
      • Fixed issue with clip on timeline not being grouped.
      • Fixed issue with distorted video in the disc created by Disc Burner.
      • Fixed issue with being unable to play HQ/HQX file in Windows Media Player when OS is Windows vista 64bit.
      • Fixed issue with being unable to change IRE of DV hardware settings to 7.5 in HD project.
      • Fixed issue with crash of EDIUS when thumbnail shows specific XDCAM clip on source browser.
      • Fixed issue with effect not being reflected when altering the settings of 3DPinP
      • Fixed issue with backgournd video of motion menu not being displayed on DiscBurner.
      • Fixed issue with created DVD chapter menu not being displayed properly if style without thumbnail is selected when creating DVD by Disc Burner.
      • Fixed issue with thumbnail and/or cursor not being displayed properly when creating BD with menu by Disc Burner.
      • Fixed issue with error depending on chapter and In/Out position when creating DVD using Disc Burner.
      • Fixed issue with not recceiving sound of DVD menu which was created when video with audio was specified for motion menu to create DVD using Disc Burner.
      • Fixed issue with distorted video when converting it in alpha matte.
      • Fixed issue with crash of EDIUS when file is output after installing Sorenson Squeeze 6.5.
      • Fixed issue with noise being displayed when applying layouter and mixer track to specific still image file.
      • Fixed issue with crash of EDIUS when clip applied to a specific mask filter is scrubbed on timeline.
      • Fixed issue with being unable to load specific PSD file properly.
      • Fixed issue with being unable to play back Canopus HQ clip captured by EDIUS Pro in Windows Media player on the environment where EDIUS is installed.
      • Fixed issue with crash of EDIUS when placing P2 AVCIntra clip on timeline and exporting it in P2 DVCPROHD format.
      • Fixed issue with being unable to transfer animation created by TitleMotionPro.
      • Fixed issue with unused file not being deleted when executing Consolidate.
      • Fixed issue with error message not being shown even if failing to perform file delete from context menu against clip registered in Bin.
      • Fixed issue with crash of EDIUS when playing back sequence clip after applying speed-change of time effect to the sequence clip.
      • Fixed issue with crash of EDIUS when appplying time remap to sequence clip.
      • Fixed issue with [Pinning/Line/Bezier] in context menu of key frame not working.
      • Fixed localizing display in multilingual environment.

Version 6.03 ( Release: 6/10/2011)

        [New Features]
      • Added support for SONY 60p/50p AVC file import through Source Browser.
      • Added support for JVC 60p/50p AVC file import through Source Browser.
      • Added support for H.264/AVC(MP4) file export. (Added support for Intel 2nd Generation Core Processors).
      • Added support for EDIUS Simul Capture Option. (Paid option)
      • Added support for K2 EDIUS Connect Option. (Paid option)


      • [Fixed issues]
      • Fixed issue with freeze of EDIUS when operating shuttle quickly in VTR emulation mode.
      • Fixed issue with dashed outline not being displayed when selecting multiple character frames by dragging in QuickTitler.
      • Fixed issue with QuickTitler not starting from the timeline menu after selecting an audio clip in the Bin window.
      • Fixed issue with switching point not snapping to the timeline cursor in multi-cam mode even if moving the switch point with mouse.
      • Fixed issue with the timeline cursor moving one more frame after pressing stop during timeline playback.
      • Fixed issue with being unable to open tape-out dialog even if the project settings matches the device preset settings.
      • Fixed issue with being unable to set the voice to monaural of Linear PCM when making DVD.
      • Fixed issue with timecode not being displayed properly when placing clip of which In/Out is specified in PLR mode.
      • Fixed issue of aspect ratio and resolution of certain QuickTime files (.mov files) not being recognized correctly.
      • Fixed issue with being unable to import Raylight DVDProHD 720p50 files made with FCP to EDIUS.
      • Fixed issue with the cutting point of the selection track not being selected when switching to trim mode.
      • Fixed issue with default transition not being applied to the clip on the selection track when link/group has been temporarily released.
      • Fixed issue with the buttons at the bottom of the window not being displayed when switching to the trim mode in a certain environment.
      • Fixed issue with the insertion point of the marker being moved back one frame when specifying to insert marker during DV/HDV capture.
      • Fixed issue with setting of the character spacing with the character unit not working correctly when modifying title once created.
      • Fixed issue with slow startup of EDIUS when using network profile.
      • Fixed issue with poor Thumbnail image quality of the menu of the DVD created.
      • Fixed issue with image files except for .psd/.png files not being displayed on profile icon selection screen.
      • Fixed issue with collapsing still image when still picture is made with Ctr+T in 10bit project.
      • Fixed issue with the stop position of the timeline cursor being incorrect after dragging the cursor off the timeline window to stop the timeline.
      • Fixed issue with overscan size setting being disregarded during output to tape.
      • Fixed issue with playback performance when using the audio mixer in learning mode if the bin window is viewed.
      • Fixed issue with being unable to burn DVD/BD by user limitation.
      • Fixed issue with focus not moving to the transition when transition is applied by keyboard short-cut.
      • Fixed issue with focus not being updated while operating jog controller when focus is on recorder side.
      • Fixed issue with still image being displayed in gray when specifying the still image as thumbnail in chapter menu.
      • Fixed issue with jittery when playing back certain MPEG files in EDIUS.
      • Fixed issue with the setting for duration of the title mixer not being memorized after changing the duration.
      • Fixed issue with slow start of proxy download when registering clip from PDW-U1 to Bin.
      • Fixed issue with being able to trim clip of the track locked.
      • Fixed issue with title clip not being copied in project consolidate.
      • Fixed issue with specified In-point frame not being displayed when capturing in thumbnail in Bin clip display.
      • Fixed issue with EDIUS displaying error when specific title file is opened if image file used in certain QuickTitler is offline.
      • Fixed issue with display status after import being varied depending on how the project file is imported.
      • Improved the settings for "output between In/Out" of the export so that it can be memorized.
      • Fixed issue with not being able to add transition using shortcut key (CTRL-P).
      • Fixed issue with writing to BD with DiscBurner while contents of BD are opened by explorer being failed.
      • Fixed issue of Up and Left key not working by the slider control of 3wayColorCorrection setting window.
      • Fixed issue with safe color not being saved in "Color wheel" effect.
      • Fixed issue with the settings being changed when specifying the target color range of 3way ColorCorrection (White balance).
      • Fixed issue with being unable to move slider to the correct position during playback in player.
      • Improved the speed to save project files.
      • Fixed issue with material forwarded from Audio CD to Bin being identified as "Video Clip" on Bin.
      • Fixed issue with unexpected Context Menu which appears even if right-click in the blank area in the profile selection part in the project selection window.
      • Fixed issue with TitleMixer effect nor working properly when the title is resized after changing SD to HD in the project automatically.
      • Fixed issue with folder name being disappeared when entering existing folder name + one character for project name on Create New Project screen.
      • Fixed issue with Duration becoming "--:--:--;--" after restart if the transition preset is created with the Duration 1 second or less in German, French, or Spanish environment.
      • Fixed issue with MP4 files recorded by SANYO Xacti VPC-FH1 not being decoded correctly.
      • Fixed issue with being unable to type "," when entering decimal values in a language OS environement in which comma, "," is used as a decimal point.
      • Improved time required to open a project that has a large amount of XDCAM EX clips in Bin.
      • Fixed issue with VSC/WFM not being displayed properly on master screen during the playback in multicam mode.
      • Fixed issue with crash of EDIUS 6.02 when pressing [CTRL] + [Shift] + click on rubberband.
      • Fixed issue with being unable to filter .m2ts file properly in the file restoration dialog from Bin of a German version.
      • Fixed issue with timing of autosave during file output (Autosave is now performed at file output).
      • Fixed issue with penetration part being lightened when the GPUfix ripple is applied between tracks of alpha material.
      • Fixed issue with combing noise being appeared in the movie when converting interlace project to progressive during export conversion.
      • Fixed issue with being unable to maintain advanced settings of exporter when being saved as preset.
      • Improved color matte so that the color of color matte can be specified while importing Final Cut Pro XML file.



  1. Registered trademarks and trademarks
    • EDIUS is a trademark of Grass Valley K.K.
    • All other registered trademarks and trademarks belong to their respective holders.

Copyright (C) 2003-2011 Grass Valley K.K.

All rights reserved.